The benefits of a rain shower,
calls for a high-flow softener.
The 14L cabinet: beautiful to look at and great in performance.

  Operating system: Fleck 5800 SXT, computer controlled: 5 cycles

    Flow capacity / flow rate: 70 l./min. thanks to a larger internal riser pipe, among other things

    Economical in use: volume-controlled regeneration: only when necessary

    Filter method: Resin filter / ion exchange, 14 ltr. resin core

    Bypass valve, for easy maintenance and diversion of water

    Adapter 240 / 24V

    In case of power failure, the unit will keep the data for another 48 hours

    Double overcurrent protection

    Exchange capacity: 39,200 ° dH, at 8 ° dH gives 4,900 l of soft water after each regeneration

    Integrated salt container, content approx. 35 L.

    System dimensions: 76 x 37 x 48 cm (HxWxD)

    Easy to install, connection: 1 ”thread.

    Applicable at water pressure: 1.4 - 8.5 Bar

    Maximum allowable water temperature: 43º C

    Comes pre-programmed

    Clear manual available

    Water hardness drop test is included

Rain showers, they are available with capacities from approx. 9 to 27.5 l/min. It will be clear that one meets your need for relaxation and refreshment more than the other. But what you want in any case is a full shower jet under all circumstances, just lots of warm water.

But imagine... you are fully enjoying your rain shower and a lot of water is suddenly taken elsewhere in the house. There goes your full shower jet, there goes your pleasure.

Fortunately, you can now prevent that. Even if you are only 2 people in a household and therefore do not use a lot of water in total. With a 10L HighFlow water softener you can soften a lot of water at the same time and in an economically responsible way. Without having to install a system that is too large with overcapacity that you never actually use.

A system with overcapacity, not just a shame because you pay for capacity that you don't need. But also because such a system uses a lot of salt and rinse water. And, in the long run, this also does not benefit the life of the softening resin. Due to the overcapacity, the maximum softening capacity will not be used often, the regeneration interval will be too long, which in turn affects the activity of the softening resin.

    - Operating system: Fleck 5800 SXT, computer controlled: 5 cycles
    - Flow capacity / flow rate: up to 40 ltr./min. soft water
    - Large internal riser
    - Volume-controlled regeneration: only regenerates when necessary, so economical in water consumption    and salt use
    - Filter method: Resin filter / ion exchange, 10 ltr. resin core
    - Exchange (softening) capacity: 28,000 ltr/dH, at 8 °dH 3,500 liters of softened water per regeneration
    - Regeneration interval in a 3-person household approx. every 7 to 8 days at 10 °dH
    - salt consumption per regeneration approx. 1.8 kg
    - Bypass valve stainless steel, for easy maintenance and diversion of water, for example for garden irrigation
    - Adapter 240/24V
    - In the event of a power failure, the unit will retain the data for another 48 hours
    - Double overcurrent protection
    - System dimensions: 76 x 37 x 48 cm (HxWxD)
    - Integrated salt tank: 35 L
    - Easy to install, connection: 1” thread.
    - Applicable at water pressure: 1.4 – 8.5 Bar
    - Allowable maximum water temperature: 40º C
    - Comes pre-programmed
    - Clear Dutch manual available
    - Water hardness drop test are included

3 year manufacturer's warranty on Fleck 5800 SXT control unit.

The economic and technical lifespan is well above 15 years.

Compact and yet high yield.

The ideal water softener when space is limited and a high yield is required. 
Capacity softened water up to 90 l./min. 
at peak load. Reliable Fleck 5600SXT computer-controlled control unit for even more user comfort and no worries for years.

Proven American technology and equipped with NSF keur.

The method of regeneration can be set at your own discretion, 
both time and volume controlled. Automatically, as manually. 
With volume controlled, the regeneration is only determined by the soft water used. 
The water meter is connected to the outgoing softened water outlet.

Performance:

    -Operating system: Fleck 5600 SXT, computer controlled: 5 cycles
    -Filter method: resin filter / ion exchange, 8 ltr. resin core
    -Stainless steel Bypass valve
    -Adapter 240 / 24V
    -48 hrs. memory capacity in case of power failure
    -Double overcurrent protection
    -Flow capacity / flow rate: over 22 l./min. continuously
    -Exchange capacity: 22,400 ° dH; at 8 ° dH approx. 2,800 l
    -Salt container content: 25 KG
    -Dimensions system: (hxdxl) 68 x 43.5 x 31 cm
    -Water hardness drop measuring set supplied free of charge
    -Easy to install, connection: 1 "wire
    -Applicable for water pressure: 1.4 - 8.5 Bar
    -Permissible maximum water temperature: 43 ° C
    -Easy to program. English manual available

This anti-scale system works on the basis of an ion exchanger, resin layer and salt. The magnesium and minerals in the water are first charged and then flow through a resin layer into the water softener. This resin layer filters the magnesium and minerals from the water, before a reaction can take place, which causes limescale.
The Digisoft water softeners are renowned anti-scale machines that ensure that your tap water does not pass lime to your pipes, equipment and sanitary facilities. In addition, Digisoft has released a line of devices that can be used for all situations.
The resin only allows soft water to pass through. This means that the minerals (including calcium) and magnesium are replaced by Sodium in the water which is let through. The Sodium released into the tap water is released by the salt with which the resin layer is rinsed.
When the resin is fully saturated, the machine will clean the resin with salt, which will also allow sodium to be released into the water. The waste or rinse water is then flushed out to the sewer. This process is automatic with the Digisoft water softener. This process can also be set digitally on the device.

These water softeners are very compact and, with a width of only 22 cm, can be easily installed in tight spaces.
In addition to its compactness, this water softener has a sleek appearance.
The COMPACT consists of: GRP pressure bottle filled with 8, 12 or 18 liters of high-quality ion exchange resin.
The water softener is equipped with a BNT1650 control system that only has essential functions.
The water softener works fully automatically and will start to regenerate at 02:00 at night after reaching the maximum capacity, or on the 10th day.
This water softener is equipped with an integrated bypass.
Water is always available during regeneration.